• Talus Baritone #052 2/7/2008
• top:     Adirondack spruce (AA)
• back & side:     Padauk
• body binding:     Ebony with BWB or WBW trim
• fingerboard:     Cocobolo
• fingerboard binding:     Ebony with Maple strip (white thin line at sides)
• fingerboard inlay (MOP) One of Ludwig or Majestic pattern(12th fret only )
• tuner::     Gotoh SS tuning machine , standard
• fret wire     standard, 18% nickel/silver
• bridge:     Ebony
• bridge pin:     Ebony
• side dot:     White plastic
• end wedge, heel cap     Ebony
• brace wood:     Adirondack Spruce
• neck:
  • Talus type sloped neck joint (body joint at 15~18th fret)
  • Mahogany one-piece neck
  • Mortise & Tenon bolt-on
  • (Cumpiano's hardware-based neck joint, Hex Key:(5/32,9/64))
  • Double Graphite Rod reinforcement
  • Two-Way Truss Rod (Hex Key:9/64)
• headstock overlay:
  • top: Padauk
  • back: Ebony
• decal:     initial y
• low bout:     17"
• depth at low bout:     5" treble side, 4" base side
• nut:    
  • unbleached bone
  • Zero fret scheme
  • 1/4"thick 1-3/4" width
• string spacing at bridge:     2-1/4"
• saddle :     3/16" thick
• rosette ring:     Paua Abalone with BWB trim
• finish:     Nitrocellulose gloss lacquer
• scale:     28.6"
   

http://www.youtube.com/watch?v=U3huWHlEV70