Inlay Spec. 3/28/2008
Headstock:- If you haven't already done the
eagles head,
instead of it being in the centre of the headstock as you show on your photo,
could it be at the top
where there is most space.
Below it, around the centre area of the headstock, could
you put your "Y" decal in
Paua.
Fingerboard :-
White MOP inlays.
Bridge :-
White MOP inlays.
Baritone Specification (3/18/2008)
-
---------------------------------------------------------------------------------------------------------------
-
Cutaway
-
Zero Fret
- top: Adirondack spruce (AA)
back & side:
Premium Fiddle Back Koa
body binding: Ebony with BWB or WBW trim
fingerboard: Cocobolo
fingerboard binding: Ebony with Maple strip
(white thin line at sides)
fingerboard inlay White MOP Majestic Delux
tuner::
Schaller SS tuning machine , standard with Ebony Buttons
fret wire LMI
FW74 (18% nickel/silver ), zero fret(StewMac #150)
bridge: Ebony
with treble clef sign inlays on both wings (white MOP)
bridge pin: Ebony
side dot: White plastic
end wedge, heel cap Ebony
brace wood: Adirondack Spruce
neck:
- Mahogany one-piece neck
- Mortise & Tenon bolt-on
- (Cumpiano's hardware-based neck joint, Hex
Key:(5/32,9/64))
- Double Graphite Rod reinforcement
- Two-Way Truss Rod (Hex Key:9/64)
Neck Joint at 16th fret
headstock overlay:
- top: Fiddle Back Koa
- back: Ebony
decal: Eagle Head inlay and y(Paua)
in the center of headstock
3/28/2008
low bout: 17"
depth:
- 5" at end block, 4" at neck block
3/20/2008
- actual measurement 4"-7/8, 3"-7/8+
3/30/2008
nut:
- unbleached bone
- Zero fret scheme
- 1/4"thick 1-3/4" width
string spacing at bridge: 2-1/4"
saddle :
1/8" thick 4/2/2008
rosette ring: Paua Abalone with BWB trim
strap buttons and end pin("strapjack" blank connector)
finish: Nitrocellulose gloss lacquer
- thickness actual measurement ~8/1000"
(top) 4/6/2008
scale: 28.6"
Hard Shell Case TKL8968
(Professional Arch-Top 17" Acoustic Bass Guitar Case)
4/2/2008
string:
D'ADDARIO EXP23 4/6/2008
waiting time: 60days estimated
completion date: 5/18/2008
additional information
- glue
- headstock overlay, top, back joint, back strip:
Polyurethane glue (GORILLA GLUE)
- graphite rods, heel cap, end wedge:
Epoxy (ALL WOOD GLUE)
- fingerboard, bridge, kerfing, binding, perfling, bracing, rosette
ring: Aliphatic-resin glue (Titebond)4/9/2008
- shell inlay, fretwire:
Cyanoacrylate glue
- nut: Aliphatic-resin glue (Titebond)
mailto:tony@yamamotoguitar.com; tsuneyuki.yamamoto@comcast.net
Santa Cruz How to Adjust Truss Rod: http://www.santacruzguitar.com/care/action.html
String Tension: http://www.pacificsites.com/~dog/StringTensionApplet.html
