Jumbo-27:  27" scale , "Wedge" body, Strong Figure Koa & Sitka Spruce   8/21/2008

• ---------------------------------------------------------------------------------------------------------------
• cutaway, 14fret clear
• top:        Sitka Spruce (AAA)
• back & side:        Strong Figure Koa
• body binding:        Cocobolo with BWB & WBW trim
• fingerboard:        Ebony
• fingerboard binding:        Cocobolo with Maple strip (white thin line at sides)
• fingerboard inlay:      non
• tuner::        Schaller SS tuning machine , standard
• fret wire        StewMac #149, 18% nickel/silver
• bridge:        Ebony
• bridge pin:        Ebony
• side dot:        White plastic
• end wedge, heel cap        Cocobolo
• brace wood:       Adirondack Spruce
• neck:        
  • Mahogany  one-piece neck
  • Mortise & Tenon bolt-on
  • (Cumpiano's hardware-based neck joint, Hex Key:(5/32,9/64))
  • Double Graphite Rod reinforcement
  • Two-Way Truss Rod (Hex Key:9/64)
• headstock:    yamamoto standard
• headstock binding:  Cocobolo with maple strip
• headstock overlay:      
  • top:    Koa
• decal:       initial  y, MOP
• low bout:        17"
• depth:
  • 3"-1/2 at neck block,  4" at end block
  • "Wedge" body (depth at lower bout):     5-1/8" treble side,  3"-1/2" bass side
• nut:       
  • unbleached bone
  • zero-fret (uses Stewmac #150 fretwire)
  • 1/4"thick 1-7/8" width
• string spacing at bridge:        2-6/15"
• saddle :        1/8" thick
• rosette ring:        Koa and Cocobolo triple rings with BWB trim
• finish:        Nitrocellulose gloss lacquer
• scale:     27"

• kerfing:    reverse
• finish thickness:    7~9/1000"
• top:    spherical(40')
• thickness  top:3.1mm~2.6mm,     back:2.6mm,     side:2.3mm
• finger board thickness:    20.5mm(2nd fret),     22.5mm(9th fret)