#081 Walnut, Western Red Cedar OMY    1/18/2009built

• ---------------------------------------------------------------------------------------------------------------
• top:        Western Red Cedar
• back & side:         Walnut
• body binding:        Ebony with BWB or WBW trim
• fingerboard:        Ebony
• fingerboard binding:        Ebony with Maple strip
• fingerboard inlay:    non
• tuner::        Gotoh SS tuning machine , mini
• fret wire        StewMac #149, 18% nickel/silver
• bridge:        Ebony
• bridge pin:        Ebony
• side dot:        White plastic
• end wedge, heel cap        Ebony
• brace wood:       Cedar
• neck:        
  • Honduran Mahogany  one-piece neck
  • Mortise & Tenon bolt-on
  • ( Cumpiano's hardware-based neck joint, Hex Key:(5/32,9/64))
  • Double Graphite Rod reinforcement
  • Two-Way Truss Rod (Hex Key:9/64)
• headstock overlay:        
  • top:    Walnut
  • back: Ebony
• headstock binding:    Ebony with Maple strip
• decal:        initial y
• lower bout:        15"
• depth:        4-3/16" at end block, 3-1/2" at neck block
• nut:       
  • unbleached bone
  • Non Zero fret (traditional nut scheme)
  • 1/4"thick 1-3/4"+ width
• string spacing at bridge:        2-1/4"
• saddle :        1/8" thick
• rosette ring:        Koa and Ebony triple ring
• finish:        Nitrocellulose gloss lacquer
• scale:         25.5”

note
thickness:  top: 125,  back:75(1.9mm)~100(2.6mm), side: 95
bridge height: 9.6mm
finger board thickness:    19.8mm(2nd fret),     22.3mm(9th fret)