retopped

#082 Koa, Adirondack Spruce OMY    3/2/2009,  9/10/2010 retopped

• ---------------------------------------------------------------------------------------------------------------
• top:        Adirondack Spruce AAA German Spruce
• back & side:         Strong Figure Koa
• bevel:    Cocobolo
• body binding:        Cocobolo with BWB or WBW trim
• fingerboard:        Ebony
• fingerboard binding:        Ebony with Maple strip
• fingerboard inlay:    non
• tuner::        Gotoh SS tuning machine , mini
• fret wire        StewMac #149, 18% nickel/silver
• bridge:        Ebony
• bridge pin:        Ebony
• side dot:        White plastic
• end wedge, heel cap        Cocobolo
• brace wood:       Adirondack Spruce  Cedar
• neck:        
  • Honduran Mahogany  one-piece neck
  • Mortise & Tenon bolt-on
  • ( Cumpiano's hardware-based neck joint, Hex Key:(5/32,9/64))
  • Double Graphite Rod reinforcement
  • Two-Way Truss Rod (Hex Key:9/64)
• headstock overlay:        
  • top:    Koa
  • back: Ebony
• headstock binding:    Cocobolo with Maple strip
• decal:        initial y
• lower bout:        15"
• depth:        4-1/8" at end block, 3-3/8" at neck block
• nut:       
  • unbleached bone
  • Non Zero fret (traditional nut scheme)
  • 1/4"thick 1-3/4"+ width
• string spacing at bridge:        2-1/4"
• fingerboard width at 12th fret: 2-3/16"
• saddle :        1/8" thick
• rosette ring:        Koa and Cocobolo Paua Abalone triple ring
• finish:        Nitrocellulose gloss lacquer
• scale:         25.5”

note
thickness:  top: 110,  back:100, side: 100
bridge height: 9.16mm
finger board thickness:    19.9mm(2nd fret),     22.4mm(9th fret)