• ---------------------------------------------------------------------------------------------------------------
• top:        Adirondack Spruce(AAA)
  • http://www.lmii.com/CartTwo/thirdproducts.asp?CategoryName=++Tops+%2D+Tonewood&NameProdHeader=Adirondack+%28Red%29+Spruce
• back & side:         Premium Koa
  • http://www.lmii.com/CartTwo/thirdproducts.asp?CategoryName=+Backs+and+Sides&NameProdHeader=Koa
• body binding:        Bloodwood with BWB,  WBW trim
• fingerboard:        Ebony
• fingerboard binding:        Bloodwoodwith Maple strip (white thin line at sides)
• fingerboard inlay(MOP)         Diamond at 3, 5, 7, 9, 12, 15th fret
• tuner::        Gotoh SS tuning machine , mini
• fret wire        standard, 18% nickel/silver
• bridge:        Ebony
• bridge pin:        Ebony
• side dot:        White plastic
• end wedge, heel cap        Bloodwood
• brace wood:       Spruce
• neck:        
  • Talus angled neck joint
  • Mahogany(sapele)  one-piece neck
  • Mortise & Tenon bolt-on
  • ( Cumpiano's hardware-based neck joint, Hex Key:(5/32,9/64))
  • Double Graphite Rod reinforcement
  • Two-Way Truss Rod (Hex Key:9/64)
• headstock overlay:        
  • top:    Koa
  • back: Ebony
• decal:        initial "y "
• low bout:        15"
• depth:        4-1/4" at end block, 3-1/2" at neck block
• nut:       
  • unbleached bone
  • standard nut
  • 1/4"thick 1-3/4" width
• string spacing at bridge:        2-1/4"
• saddle :        1/8" thick
• rosette ring:        Paua Abalone with BWB trim
• finish:        Nitrocellulose gloss lacquer
• scale:         25.5”
• hard Shell case
• string:   Daddario EJ16 light gauge

*****************************************

• starting date: 4/28/2009