27"~25.5" multi scale "Wedge" body 6 string Jumbo, standard tuning EADGBE     6/13/2009 completed

• top:  AAA grade Adirondack Spruce
• back & side: 1st grade Honduran Rosewood
• "Wedge" shape Jumbo body
  • lower bout:        17"
  • depth: 
    • 3"-1/2 at neck block,  4" at end block
    • "Wedge" body (depth at lower bout):     5-1/4" treble side,  3-1/2" bass side
• sound port:
• body binding:  Bloodwood with WBW, BWB trim
• fingerboard:   
  • wood:    Ebony
  • binding:    Bloodwood with Maple strip
  • inlay:    none
  • fret wire:    Stewmac #149, 18% nickel/silver  (or LMI FW74)
  • zero fret:    LMI FWG110 (copper alloy)
  • nut:    1/4"thick , 1-3/4" width bone
    • fingerboard width at 12fret:    2-1/4"
    • string spacing at bridge:        2-1/4"
• neck
  • Honduran Mahogany  one-piece neck
  • Mortise & Tenon bolt-on
  • ( Cumpiano's hardware-based neck joint, Hex Key:(5/32,9/64))
  • Double Graphite Rod reinforcement
  • Two-Way Truss Rod (Hex Key:9/64)
  • neck to body joint at 14fret (bass side)
  • side position dot (white plastic)
• headstock
  • overlay:     Honduran Rosewood(top), Ebony(back)
  • binding:    Bloodwood with Maple strip
  • decal:    y
  • tuner:    Gotoh SS with black button
• rosette ring:    Bloodwood, Koa triple ring (standard design)
• bridge
  • Ebony
  • Ebony bridge pin
• saddle:  1/8" thick bone
• end wedge, heel cap:    Bloodwood
• thickness 
  • top(120)
  • back(110, 2.7mm)
  • side(90, 2.3mm)
• finish:  Nitrocellulose satin Lacquer 
• string: light gauge
• Hard Shell Case
•  

note:

• bridge plate:  3/32

other points.....

1) bloodwood binding on the body, neck (along the sides like the one you showed me at your house), and surrounding the soundhole.  would you also do it on the headstock?  Okay but I want to use same design I'm using now.

2)no fretmakers......a little larger ones along the top of the neck.  position dots

3) can the tuning pegs be black? can they be ordered that way?  Okay   Ebony or Plastic.   no extra charge

4) no pickguard......Okay

5) make the sound hole just ike the one on #83 at schoenberg guitars  Okay

6) i like a balanced sound but want a big round bottom end with penty of top also. i think we talked about this.  Okay

*************************************************

completion:  1 month from starting date

expected starting date:  5/18/2009

pickup K&K Pure Mini:    $98.40 + $6.95(S&H)  6/13/2009

*************************************************